Programming a Tunstall Amie Pendant

Programming a Tunstall Amie Pendant

The pendant will not work until these instructions have been followed in full

These Instructions are applicable to Tunstall Haven, Communicall, and Vision. This programming must be carried out by the site manager or by someone with access to the master unit. 
  1. Place the master unit into the speech module
  2. Enter '987' then press 'Select'
  3. Enter '800' then press 'Select'
  4. Enter the module number to pair the pendant too then press 'Select'
  5. Press the pendant until the red light illuminates. The screen should display a long number identical to one on the rear of the pendant.
  6. Press 'Clear' on the master unit
  7. Enter '997' then press 'Select'
  8. You can now test the pendant. 
Ensure the pendant calls correctly from the property you are expecting it to.


    • Related Articles

    • Programming a Tunstall My Amie Pendant

      The pendant will not work until these instructions have been followed in full These Instructions are applicable to Tunstall Connect, Vi and ViIP. For other systems, please contact us. This programming must be carried out by the site manager, or ...

    • Programming an Erik or Elvis Pendant

      The pendant will not work until these instructions have been followed in full. You will need to be in front of the Caretech unit you wish to program this pendant to Press and hold the 'Green' button on the Caretech unit until your hear the second ...

    • Programming an Appello Smart Trigger

      The pendant will not work until the following instructions have been followed in full. This programming must be carried out by the site manager, or someone with access to Appello HQ. 1. Unpack and set up the pendant on either the neck cord or wrist ...

    • Programming Tynetec XT2 wireless devices

      This guide relates to all XT2 wireless devices such as pendants, pull cords, smoke detectors and fall detectors. Adding Wireless Devices Method 1 - Via the handset This programming must be carried out by the site manager, or someone with access to ...

    • Tynetec XT2 Managers Panel Faults

      The managers panel on a Tynetec XT2 system is designed to be the managers interface to the system, showing things such as the Im OK function, faults, event logs and live information such as calls in progress. You can also program and de-program ...